IP phones, VoIP ATA, softphones and much more. Almost all VoIP-enabled devices can be used with the Cloud PBX. The process of setup steps are always similar. In the following, we would like to introduce you to this logic and give you a rough overview of the necessary steps. We have linked instructions for the […]
Setting up the Cloud PBX Read More »
The area code of a phone number depends on the associated connection address. With Easybell, you can manage multiple locations in one account and book phone numbers for them. You create your first location when you order your Business SIP Trunk. You can add further locations later in the location management. Creating a new location
Using multiple locations and area codes in one account Read More »
Hereafter, we document the features and recommended settings of www.easybell.com trunks in SIP devices. easybell fully supports the SIP 2.0 standard according to RFC3261. Reference settings Registrar for SIP trunks sip.www.easybell.com SIP port (default) 5060 (UDP or TCP) SIP port (alternative) 5064 (UDP or TCP) RTP port range 20,000 – 50,000 (UDP) RTCP support activated
Features and reference settings Read More »
Resource accounts are required in Microsoft Teams to use features such as voice menus (IVRs), queues, and call groups. And of course they need to have a phone number assigned. We’ll show you how to do that in this article. You can also easily assign a phone number to resource accounts in Teams Connector. To
Assigning a phone number to a resource account in Microsoft Teams Read More »
Before you can test our Business SIP Trunk, you must register with easybell. We are also required to verify your address before assigning any phone numbers. Or in other words: we have to see which phone numbers we are allowed to assign to you. Don’t worry! This takes only a few minutes! Ordering in 6
Ordering Business SIP Trunk Read More »
It’s easy to get started with an easybell Business SIP Trunk. Here we explain the first steps. Note: These instructions refer to SIP trunks that you have ordered via www.easybell.com. So far, we only offer SIP trunks in Austria. If you are a customer from Germany, please refer to the help section on easybell.de. After
Set up a SIP trunk in five easy steps Read More »
With Voice-over-IP (VoIP) from easybell, you can easily set up which phone number (caller ID) is displayed to others yourself. Below, we explain three modes in detail. PBX determines caller ID (CLIP no screening) This setting is useful if you use a PBX that manages phone numbers and extensions. Rules are defined for outgoing calls,
Setting up caller identification (CLIP) Read More »
With our block and allow lists, you can define exactly for each SIP trunk which phone numbers (ranges) you want to allow for incoming or outgoing calls. Because it is not always necessary or wanted that a phone connection is unlocked for all possible calls. In some cases, it may even make sense to severely
Set up block lists and allow lists Read More »
With a Business SIP Trunk, you enjoy a high degree of flexibility in the way you arrange your existing phone numbers. And if you need additional phone numbers, we will provide them as quickly as possible. You can order new phone numbers quickly and easily in two different ways: Very quickly: In the overview of
Order new phone numbers Read More »
You can manage several trunks in a Business SIP trunk from easybell. In each of these SIP trunks you can have as many numbers as you like. You therefore enjoy maximum flexibility when putting together the right number structure for every company. In this article we want to show you how you can connect phone
Linking phone numbers to a SIP trunk Read More »
